{{results.messages.text}}
Dimetrics PTW 150 Power Supply with B2 WeldheadThis is a complete, ready to weld, system.This equipment has been fully tested and is in very good condition.The weldhead comes with the collet sizes listed below183161458341.0
{{results.messagesById['https://www.shoppok.com/houston/a,41,267322,Dimetrics-PTW-150-Orbital-Welding-System-Welder.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
Offered for sale is an Eckold Kraftformer 665 metal-forming machine with tooling. Works perfectly with no issues. This was purchased by us from Europe about 15 years ago and has only been used in our specialty shop. Very well taken care of. These are very difficult to obtain in the US.nbsp This 665 is available for far less and has a full compliment of tooling .
{{results.messagesById['https://www.shoppok.com/houston/a,41,267325,Eckold-Kraftformer-665-Metal-Forming-Machine-with-Tooling.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
$5,000

Ecoquip 600

10 minutes agoHouston, TX+20 milesTools for Sale
The EQ600 is our high-production, stand-alone unit that attaches to any 375600 cfm air compressor. It has the ability to blast from 30140 psi. This unit comes with a hot-dipped galvanized blast pot, stainless steel crash frame, control panel, plumbing and components, and our user-friendly controls. It has a 125-gallon, UV-protected poly tank. All of our units are designed to withstand the tough...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267326,Ecoquip-600---Vapor-Blast-Machine.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
Ellman Pelleve S5 Wrinkle Reduction System. Unit is in great condition, comes with foot pedal, grounding plate and 1 hand pieces.
{{results.messagesById['https://www.shoppok.com/houston/a,41,267327,Ellman-Pelleve-S5-Wrinkle-Reduction-System.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
For sale is a like new Envirosight Supervision Sewer Inspection System.IncludedSVC100 PanTiltZoom Camera HeadSV140 Transporter - 6 wheel drive - 6quot-24quot pipeSV250 Transporter - 6 wheel drive - 10quot-60quot pipeSVA350 Auto Cable Reel - Approximately 90039 of cableCCU - Controls system Desktop ControllerRemote Controller - Rear mounted off reelWheels - 6quot, 8quot, 10quot, 12quot rubber - ...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267328,Envirosight-Supervision-Sewer-Camera-System.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
This unit has been gently used and it is still in great shape. It is still in its original box with packaging and comes with necessary software and cables. Unit works excellent.Specificationsnbspnbsp nbspBuild Envelopenbspnbsp nbsp1.58quot x 1.18quot x 3.94quot40 x 30 x 100mmERM Pixel Sizenbspnbsp nbsp31 microm 0.0012quotLinear Z Axis Resolutionnbspnbsp nbsp1 micromDynamic Voxel Resolution in Z...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267329,EnvisionTEC-Perfactory-Micro-Desktop-3D-Printer.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
This is a used Epilog Helix Laser Engraver. It is fully functional and in good cosmetic condition. It comes with many supplies and accessories, making a turn-key engraving startup.Here are the laser specs50 watt24quot x 18quot bed sizeAuto focusRed dotAir assistBrand new lens installedPurchased mid 2013Used lightly in an office environmentIn addition to the laser, the following items are also i...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267330,Epilog-Helix-Laser-Engraver-50-watt-24--x-18--.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
ESSEMTEC Pantera PAN-XV Low volume pick and place system 2011, 0201 with feedersEssemtec Pantera XV Pick and Place Machine with FeedersModel yearnbsp 2011Flexible Mounter, Ideal for High Mix Volume, Top Down Vision,Intelligent tape feeder 8 to 56 mmPlacement speed 4lsquo500 cphEasy graphical operating softwareOptical alignment ldquoon the flyldquoUpward Vision system for component inspectionAbs...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267332,Essemtec-Pantera-XV-Pick-and-Place-Machine.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
For sale is a great Fadal 904-1 VMC 3016 CNC Milling Machine.General InfoStock CM-161005Location Livingston, TNBrand FadalModel 904-1 VMC 3016Serial 32000091356Year 2000Approx. Shipping Weight 8,300 lbsApprox. Shipping Dimensions 98quot L x 100quot W x 104quot HLoading Fee $1,000 Rigging RequiredSpecificationsX Axis Travel 30quotY Axis Travel 16quotZ Axis Travel 20quotTable Size 39quot x 16quot...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267333,Fadal-904-1-VMC-3016-CNC-Milling-Machine.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
Up for sale we have a good condition 2011 Fanuc LR Mate 200iC with R-30iA Mate Control Robotic System. This robot has the optional 6 axis brake specification as well as the severe dust and liquid protection specification.nbsp This robot has been fully tested in our facility and found to be in great condition and ready to put to work. The system is complete the arm, controller, connection cables...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267334,Fanuc-LR-Mate-200iC-Robot-System.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
For sale is a Faro EDGE 14000 Portable Coordinate Measuring Machine 12ft 7 Axis Arm with Stand.nbsp The power supply is included, and battery is holding a charge. Software also included .As the industry leader, FARO once again raises the bar in portable measurement with the revolutionary FARO Edge. With its built-in touchscreen computer and ldquoSmartArmrdquo technology, the Edge simplifies the...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267335,Faro-EDGE-14000-Portable-Coordinate-Measuring-Machine.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
Like New FBM Compatta Continuous Chocolate Tempering Machine.Machine was made at the end of 2013 and has been in operation for a little over 1 year.nbsp It is in perfect working condition and is beautifully maintained. Technical specifications of unit belowBowl capacity 12kgThroughput 4-6x bowl capacity per hour, depending on type of work being doneInstalled power 900 watts 220v single-phaseDim...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267336,FBM-Compatta-Continuous-Chocolate-Tempering-Machine.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
For sale is a like new condition Finamac - Turbo 8 high powered Popsicle Machine accessories.A semi-automated machine for producing water-based orange, pineapple, lemon, etc or milk-based chocolate, vanilla, etc popsicles.Operates using residential of commercial monophase energy.nbsp It is a practical and fast machine, endorsed by numerous successful businesses.Equipment with air condensation c...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267337,Finamac-Turbo-8-high-powered-Popsicle-Machine---accessories.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
10 minutes agoHouston, TX+20 milesTools for Sale
Excellent Condition - Used FLIR T1KT1020 Professional Thermal Imaging CameraIncluding all original hard transport case and accessories2 years Manufacturer39s Full product warranty5 years Manufacturer39s Battery warranty10 years Manufacturer39s Detector warrantyWhat39s in the box- Infrared camera with lens- 2 Batteries- Battery Charger- Hand Strap- Hard Transport Case- Lanyards- Front Lens Cap- ...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267338,FLIR-T1K-T1020-Professional-Thermal-Imaging-Camera-.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
3 hours agoHouston, TX+20 milesTools for Sale
For sale is a stunning like new Diedrich IR-12 coffee roaster.nbsp Built to order in 2013, it39s been only gently used since then only 25 hours of use on the hour meter.Some other info about this particular roasterCapacity 12 Kilos 26 Pounds Per BatchElectrical 110vGas Type NaturalRoaster Weight 960 PoundsRoaster Overall Dimensions 76quot H, 42quot L, 30.5quot WColor Blue with Grey Pin Striping...
{{results.messagesById['https://www.shoppok.com/houston/a,41,267319,Diedrich-IR-12-Coffee-Roaster.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
3 hours agoHouston, TX+20 milesTools for Sale
For sale is a Digitrak F5 Locating System With Blue 5XD 1912 Long Range Transmitter.Very nice condition.nbsp Tested and working perfectly.Only 162 Hours.Comes with one long range 5XD 1912 Transmitter.Three batteries, fully charged and tested.Battery charger with AC and DC cords.Remote display with DC cord.
{{results.messagesById['https://www.shoppok.com/houston/a,41,267321,Digitrak-F5-Locating-System.htm?utm_source=ClazMisc&utm_medium=feed&utm_campaign=global&trmsource=clazoutfeed']}}
Used Black & Decker Table Top Miter Saw. Adjustable for various angles. In good condition.
{{results.messagesById['http://kingwood.bookoo.com/i/68663240']}}
Used Black & Decker Table Top Grinder. Grinder has protective shield. In good condition.
{{results.messagesById['http://kingwood.bookoo.com/i/68663755']}}
Used Delta Belt & Disk Table Top Sander. In good condition. NOTE: New and used sander shown.
{{results.messagesById['http://kingwood.bookoo.com/i/68664310']}}
Blast Cabinet for sale. I've used this for many years and only reason I'm getting rid of it is because I bought a bigger one for my needs. It comes with 3 new plastic lens (recommend getting glass cut for this) and it will need new blast gloves and you can get those at Northern Tool supply for around $35 from what I can see online. Please text me before calling 832-549-7223 Mike
{{results.messagesById['http://kingwood.bookoo.com/i/68668349']}}
Post Ad